ITEC 630 Information Systems Analysis, Modeling, and Design Individual Project Assignment

ITEC 630 Information Systems Analysis, Modeling, and Design Individual Project Assignment

  

ITEC 630

Information Systems Analysis, Modeling, and Design

Individual Project Assignment

Purpose

The purpose of the individual system analysis and design project is to demonstrate student’s ability to apply the knowledge learned in this course to a real-world project.

Topics Suggestions

1. The system analysis and design project must be realistic and it will be done using techniques covered in this course. The list of topics suggested for this project is as follows:

a) Ticket purchase system (airline, train, cruise, concert, or others)

b) Internet shopping sites (clothing, shoes, books, music, or others)

c) Local real estate agency system

d) Rental system (car, video, or others)

e) Warehouse management system

f) Student record system

g) Banking system

h) Insurance purchase system (life, medical, homeowner, or others)

i) Credit card management system

j) Library circulation system

2. The above list is meant to be suggestive and if you have an idea about a specific topic, please consult with me early to determine if it is suitable for the course.

3. You are to submit your proposed Individual Project Topic for instructor approval via the Individual Project Topic Proposal assignment folder/link for instructor’s approval by the end of Week 2.

4. I will respond using the same assignment folder/link letting you know if I need additional information about your topic proposal and/or whether your proposed topic is approved. 

  

Project Deliverables

The project requires students to perform three phases: (a) requirements analysis, (b) system and database design, and (c) a project plan. Note that in the phase 3, students are required to use the MS Project software for their project schedule.

The deadline for the Individual Project can be found in the schedule section of the class syllabus.

You are to submit one file (Microsoft Word) for this assignment.  All diagrams and charts are to be embedded (copied and pasted) into your Microsoft Word file submission for this assignment.  Please make sure they are large enough and legible.  I need to be able to read them. 

The following layout/format including the title page and all three phases is recommended for the project.

Title page (project name, author, and date)

Each item below is to be labeled as below and addressed individually.  No topics are to be combined.

The following layout format covering a title page and all three phases is recommended for the project.

Title page (project name, author, and date)

Phase 1: Requirement analysis

A. Problem definition

B. Issues

C. Objectives

D. Requirements

E. Constraints

F. Description of the proposed system

G. Logical model design

1. Data flow diagrams

· Context diagram (with an accompanying written description).

· Diagram 0 (with an accompanying written description).

o Diagram 1 (Diagram 1 is optional) (with an accompanying written description).

· Descriptions of processes in each diagram

2. Descriptions of outputs/inputs/performance/security or controls

H. Specific requirements, if any (interface, operational, resource, performance, etc.) (You should not ignore any special interface, operational, resource, performance, etc. issues – All are to be addressed here).

Phase 2: System and database design

A. User interface

Design an overall user interface consisting of screens, commands, controls, and features to enable users to use the system. (You are to design the screens that will be used in your project- they are not to be copied and pasted from other sources).

Be sure to include a written description for each of the items that corresponds with each screen and the input/output procedures.

1. How data will be input to the system?

· The physical layout for each input

· The input design and procedures

2. How data will be output from the system?

· The physical layout for each output

· The output design and procedures

B. Data design

Develop a plan for data organization, storage, updating, and retrieval.

1. Database design 

· Database tables with their attributes should be presented

· Primary key(s) should be identified in each table, if any

· Three steps of normalization should be included. (You are to show each step of normalization to 3NF – Be sure to identify each step in your normalization process)

2. Entity-relationship diagrams You are to draw an Entity Relationship Diagram (ERD) complete with Crows Foot notation.  Remember that when reading ERDs the Entities and Relationships are read in both directions. Be sure to show the minimum and maximum cardinality for each direction.

3. Data file storage and access

C. System architecture

Determine the architecture of the system as Web-based interface, client/server architecture, Internet/Intranet interface, network configuration, etc.

Phase 3: Project plan

A list of tasks or activities needed for implementing the proposed system

Estimating completion time and costs (cost includes a breakdown of labor, hardware, software, etc.)

A project schedule for performing those activities (Gantt charts or PERT charts)

References are expected and are to be in complete APA format. 

Note that there is no other required software package except the MS Project software in this ITEC-630 course. As a result, you are only required to use the MS Project software to handle the scheduling part of the project and for other parts, you can use any word editing software or any drawing tools software.

  

Individual Project Rubric

The individual project will account for 25% of your total points possible and students should use the APA format for the format of the individual project reports. The following rubric will be used when grading your individual project:

  

Qualities and   Criteria

Poor [0-80)

Good [80-90)

Excellent [90-100]

 

Format/Layout

§ Presentation of   the text and structuring of text in an organized and thoughtful manner

§ Follows phases   requirements

(Weight 20%)

Follows poorly the requirements related to format and layout.

Follows for the most part all the requirements related to format   and layout. Some requirements are not followed.

Closely follows all the requirements related to format and   layout. 

 

Content/Information

§ All phases of   the project are addressed and contents in each phase are adequate

§ The project   proposal is technically sound and realistic

§ The project is   done using techniques covered in this course

§ MS Project   software is used in the project plan

§ The project   design can be implemented in reality

§ Activities and   information are constructed in a logical pattern among phases to support the solution

(Weight 70%)

The project does not cover all phases and it is not done for the   most part with techniques discussed in this course. The required software is   used poorly in the project plan. The project proposal is hardly realistic and   the tasks proposed can not be done easily in reality. Activities and   information among phases are badly designed and do not support the solution.

The project covers all phases with adequate contents in each   phase for the most part and it is done with some techniques discussed in this   course. The required software is used in the project plan for the most part.   The project proposal is relatively realistic and some proposed tasks can be   done in reality. Activities and information among phases for the most part   are designed to support the solution.

The project covers all phases with adequate contents and it is   done with techniques discussed in this course. The required software is used   in the project plan. The project proposal is realistic and the tasks proposed   can be done in reality. Activities and information among phases are designed   to support the solution. 

 

Quality of Writing

§ Clarity of   sentences and paragraphs

§ No errors and   spelling, grammar and use of English

§ Organization   and coherence of ideas

§ APA style compliance

(Weight 10%)

The project is not well written, and   contains many spelling errors, and/or grammar errors and/or use of English   errors. The project is badly organized, lacks clarity and/or does not present   ideas in a coherent way and it is somehow APA style compliance.

The project is well written for the   most part, without spelling, grammar or use of English errors. The project is   for the most part well organized, clear and presents ideas in a coherent way   and it is somehow APA style compliance.

The project is well written from start   to finish, without spelling, grammar or use of English errors. The project is   well organized, clear and presents ideas in a coherent way and it is   completely APA style compliance.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>